Bear Grylls Gear » Survival » How To Make A Log Bird Feeder

How To Make A Log Bird Feeder

Here’s everything you need to know about How To Make A Log Bird Feeder. Find all the information it in this article.

An auger bit or paddle bit will work best for this application. Second-hand shops are a great place to check for reasonably priced bird feeders. Best of all, many of the treasures found in these types of stores are usually pretty unique. The one thing you’ll need to be careful about is checking the quality and making sure the feeding functionalities have not been compromised at all.

The easiest, fast option is to just leave the top flat and screw the eyelet, or hook, into the top. You won’t need the 1×6 boards and there are no angles to cut. The second feeder is one that is made from a scrap piece of 4×4 post you may have leftover from some other home project. Again, both are easy to make and are great little projects you can build with your children or grandchildren. Finally, attach a chain or piece of wire on to the hook, hang the feeder from a tree and wait for the birds to come.

Diy Milk Carton Bird Feeders

And, as you mention, you can just smear it on the tree bark as well; they will find it. Alternatively, you can put peanut butter in a dish from your personal jar, THEN take it outside. I have found it’s easier to get a giant jar of the store brand peanut butter and reserve it for outdoor use. The ends on options 1 and 2 both contain the pith and will eventually crack as the wood dries.

When working with any power tools these two items are a must, at a minimum. I only drilled two holes in our feeder, but you can drill as many as you would like. Holes can be drilled on the back and the sides as well.

Build A Bird Feeder: Milk Jug Bird Feeder

Use looped plastic cord going through each eye hook to hang the bird feeder. Create a square frame using the 1- x 2- x 10-inch pieces of wood. Each piece of wood should lay on its 1-inch side, with the 2-inch side pointing upward. In case all of your pinecones are tight, don’t panic.

This bird feeder is super easy to make and healthy for the birds too. If your children know that food scraps decompose, you can teach them that unused food can be used for other purposes too. Make this easy orange bird feeder to give them an idea. Spread out some birdseed on a plate or a sheet of paper and roll the pinecone covered with peanut butter on it such that it is completely covered.

Plastic Bottle Bird Feeder

If you like the rustic look of the unfinished cedar, you can skip this step. Note, however, that the wood stain and sealer will help protect the wood from the environment. Cut out the traced square of aluminum screen using a sharp pair of scissors.

Order online and The Home Depot delivers where and when you need it. Use wood glue to attach the pieces in an L-shape. The Happy Gardens stores offers an expansive assortment of special collections, all of which are beloved and top-rated garden products. While perusing our site, you can also check out our brand new line of merchandise, with exciting gifts available all year round. Check out this non-DIY alternative from Happy Gardens, the Rustica Italia Gazebo Bird Feeder.

Acorn Bird Feeder

How to Make a Pine-Cone Bird Feeder Without Using Peanut Butter Collect pine cones. Lay your pine cone on wax paper and tie an 8-inch piece of twine around the base of the pine cone. Spread a thick layer of suet all over the pine cone using a small spatula.

Smaller bird species, like chickadees, tend to use the perch more frequently. Although they are easily capable and willing, to use the grooved perches as well. The cuts may not be perfect or as clean, but the results are still nice and it’s easily doable. If you choose to use one of the other saws, that’s great too. I’m sure the finished product will be a little nicer and would make an awesome gift or to sell at a garage sale.

Hummingbird Food

Lay the cut square of screen on top of the frame. This will be the bottom of the bird feeder where you place the bird seed. However, you will not place a bottle inside the pot. Instead, just add the food into the pot and drill some holes on it.

Log Suet Feeder

A DIY bird feeder doesn’t get more charming than this repurposed tea cup and saucer. The steps boil down to glueing and hanging, so it’s super easy. Use a tea cup and saucer you’re willing to part with or buy a special one to use for this project. Using the dimensions from the bird feeder plans above , mark where the holes are to be drilled. The angled end of the 14″ piece is the top and the high point is the side where the holes will go. Before drilling the holes you may want to check out my article on Tip For Drilling Holes.

Diy Bird Feeder Stands

Thread a string through it, fill it with birdseed, and hang it at a height. Fill the hollowed log with birdseed and suspend the log in an accessible place. Next add 2 cups of bird seed to the gelatin and mix thoroughly.

Build A Bird Feeder: Peanut Butter Jar Bird Feeder

As you can see from the picture above it’s possible to attract some pretty good-sized birds. Alternatively, you can recycle an old table leg, a piece of fencing or a stand-alone coat hanger in place of pipe. Get creative with hooks, doorknobs or cabinet knobs to use as hangers. Durable chain allows you to hang the bird feeder from only two of the eye hooks.

Log Bird Feeder

Once you have all the material collected, this feeder can be put together in a half-hour. It’s an easy little project and you’ll enjoy feeding and watching the birds all winter long. Build a second wood frame using the process from step two. This time, use the 3/4- x 1- x 10-inch pieces of wood. Create and glue a second L-shaped piece with the remaining two pieces of wood. Another great option doesn’t even require you to leave the comfort of your own home.

Bird Feeder Diy Craft

Learn how to make this hanging log bird feeder from a natural log or fallen tree. This homemade DIY bird feeder will attract chickadees, nuthatches, woodpeckers, house finches, goldfinches, and bluebirds to your yard or garden. In under 15 minutes, you can create this rustic handmade seed feeder using a recyled or upcycled log.

Again, this is easier before attaching the roof boards. I place the perches 1-1/2″ below the bottom of the suet holes. I recommend and use, in place of the more expensive Forstner bits, an arbor hole saw set and a spade bit set. Birds burn a ton of protein flitting about, so they need to store up as much as they can. We prefer to use chunky peanut butter and then roll it in seeds like this.

en_USEnglish