Bear Grylls Gear

Survive in the Wild With the Latest Gear

Vg 1 Steel Vs Aus 8

7 min read

Here’s everything you need to know about Vg 1 Steel Vs Aus 8. Find all the information it in this article.

Yes, technically there are “better” steels out there (CPM-125V, CPM-10V, K294 to name a few) but these are extremely rare in the marketplace. If you’re looking for a damascus steel kitchen knife knives, GladiatorsGuild is a hand made damascus steel kitchen knife set made for both professional and home use. In fact, it’s not technically a steel at all, as it uses titanium and nickel.

The word means flowing ink and it refers to the beautiful wave-like pattern existing in the knives made with this steel. This steel scores in between 62 to 64 in Rockwell scales. The knives require regular sharping to get better performances. The knives made with this steel needs to be taken care of regularly as they are not stainless.

Hardness: Maxamet

This means knives made using s30v tend to last longer than the aus 8 ones. Sharpening the s30v will, however, be more challenging than aus-8 stainless steel. It’s a little tougher than 440C but not as corrosion resistant. We would say it’s really a wash if you’re comparing them head to head.

Now that we understand what goes into steel and what the main types are let’s cover what characteristics a good blade should have. However, some qualities must be given up for others in their chemical composition when developing particular steel. So finding the “perfect” knife can be somewhat of a double-edged sword — pun intended. For instance, when crafting stainless steel, some of the carbon needed for hardness must be given up for elements that contribute to non-corrosiveness, like chromium.

Toughness

If you’re looking for a chef’s knife that is made out of VG-1 steel, our recommendation is Yoshihiro 8.25-inch chef’s knife. Because the amount of Carbon is high, the steel is very resilient. The multi-layered style of folding the steel makes the blade strong and durable. The design of a single knife will not appear in the world twice as the folding and layering process varies from craftsman to craftsman.

What is AUS 8 steel?

AUS-8 steel is Japanese made, very similar to 440 steel but with vanadium added to provide more hardness. This is an upper medium quality steel that is favored by many knife makers and designers for its cost-effectiveness as well as its corrosion resistance.

It’s also a fine grained steel that can take a very fine edge. Consider it a cheaper alternative to H1 steel with decent edge retention but it won’t hold an edge as long as say, 154CM. H1 steel from Japan’s Myodo Metals is basically the ultimate in corrosion resistance and essentially does not rust. Naturally, this comes at a price and that price is edge retention which is relatively poor.

What Are The Best Types Of Steel For A Knife?

What differentiates AUS-8A from AUS-8 is that it has been heat treated. Typically these steels fall between on the Rockwell Scale. In this alloy name, the appended ‘A’ indicates that the alloy has been annealed. AUS-6 has a lower Carbon content of .65% and is usually considered a low quality steel. AUS-8 has a slight increase of Carbon content at .75% along with increased amounts of Vanadium.

Stainless steel excellent resistance against rust but becomes dull easily. Carbon steel has excellent edge retention but is more prone to rust. That is why knives are made with the combination of stainless steel and carbon steel. The different company utilizes different ration of those two steels to gain their desired product. I don’t have much experience with VG-1, but my research shows that this steel is manufactured by Takefu Special Steel, who also manufactures VG-10.

Know Your Knife: A Guide To The Best Steel For Knives

Carbon steel can achieve exceptional sharpness and Super Blue steel is an ideal example. Super Blue steel or more commonly known as Aogami Super blue Steel is one of the finest carbon steel material in the cutlery industry. The knives made with this steel is famous for its exceptional sharpness. The Super Blue steel scores between 60 to 65 HRC in Rockwell scale.

A tough blade steel resists chips and total failure when subjected to beating, impact, twisting, and torsion. Tough blade steels are ideal for camping and hard-use. Where a normal steel would chip, these knives can sustain intense batoning sessions, power through staples, and glide through steel strapping.

Edge Aka Sharpness

1084 is a high carbon steel and like all high carbon steels it can rust and will tarnish/patina if not properly taken care of. Developed for its work performance, especially toughness, and edge holding ability. Rockwell Scale -A scale which determines the hardness of a material by a series of tests. Carbon -Increases hardness, tensile strength, and edge retention. These same elements are required by chefs during the cooking process in order to produce top quality food.

How good is vg1 steel?

VG-1 (Takefu Special Steel Co., Ltd.) is quality Japanese High Carbon Stainless Steel that is popular for making cutlery. It has good corrosion resistance, edge retention and edge sharpness and is capable of achieving a relatively high Rockwell hardness.

We looked at common steels used by popular knife brands to help you select the right material for your blade. Check out this site for some really good information on knife steels . There is some reading involved but if you want to know how to invest your money, you should know good steels from the bad.

Shop For Knives Online

The bulk material is harder than stainless, allowing them to hold a sharper and more acute edge without bending over in contact with hard materials. But they dull by abrasion quicker because they lack hard inclusions to take the friction. Carbon steel is well known to take a sharper edge than stainless. A higher grade of cutlery steel, with more carbon, allowing for much better edge retention when properly heat-treated. It can be hardened to approximately Rockwell 58 hardness, making it one of the hardest stainless steels. This is a high-end, bearing grade stainless alloy made with high carbon content.

Is Australian tough steel 8?

Machinability: AUS 8 stainless steel is composed of Molybdenum and Sulfur; they both offer great machinability for the steel. Toughness: AUS 8 stainless steel is popular tough steel, due to the Chromium in it, and a bit of Nickel.

Therefore, the billet can be stretched and folded as much as the layers required. According to the American Bladesmith Society , in order to receive a Master Smith rating, the Damascus blade must be made with a minimum of 300 layers. LC 200N is an elite performer, with high hardness, high toughness, and off-the-charts corrosion resistance. This is a virtually stain-proof steel suitable for all sorts of aquatic environments. It’s not a particularly great cutter, being poor at retaining an edge. But it’s lightyears ahead of the alternatives, specifically titanium-bladed knives.

Is Aus 8 Stainless Steel Good For Knives?

It’s instantly recognizable as it bears a swirling pattern caused by the welding of two different steels and so often referred to as “pattern-welded” steel . There are many myths about the strength and capabilities of Damascus steel but today it is largely popular because of its aesthetic beauty. Alloying elements are an important ingredient vital in getting the best steel for the job. Here’s a brief description of their impact on the resulting steel’s properties. For more information see our knife steel composition guide.

Is it hard to sharpen AUS 8?

AUS-8 is easy to sharpen.

It’s used for combat knives, bushcrafting knives, and other applications where having a supertough blade trumps the need for edge retention and corrosion resistance. A very common, tested and tried stainless steel for kitchen knives. Is a great introduction steel to Japanese knives, in which, it is easy to sharpen, very durable, rust resistant, and is usually reasonably priced.

Aus

The aus-8a knife exhibited this trend quickly while the VG-10 blade held up well until the third round. The D2 blade showed little loss of aggression the fourth round, where more of a slice was needed. The CPM-10V blade showed no detectable loss of aggression throughout. Vanadium -Hardening and improved wear resistance, but moreover, it promotes fine grain structure and ease of sharpening. Carbon is one of the most critical factors, as it functions as a hardening element and makes the iron stronger. Every type of steel will have some amount of carbon, and often, the amount can be telling of the quality of a blade.

So if you can tell the difference between AUS-6 and 420… you should be looking at better knives. As you can probably tell we’re sort of partial to anything Crucible touches. And, CPM-20CV is the gateway steel to some next level metallurgy. It’s up there with top tier steels like CPM-S110V, CPM-S90V, Bohler’s M390, Hitachi’s ZDP-189, and Elmax.

en_USEnglish