I would have mentioned limb alignment – it might be worth double checking that everything in the limb pocket is locked down. Otherwise it might be worth doing a powder test just to check that there isn’t a clearance issue. I have always believed that the sight should be as far out as possible. At longer distances, it is sometimes necessary to pull the sight block in closer in order to adjust the angle of elevation. In order to avoid vibration and excess noise always be sure your bow sight is mounted securely to the riser.
On the other hand, if you know your target will be at more or less a certain distance, this is no issue and you can go ahead and get a single pin bow sight. You have one major advantage with single pin bow sights – you can shoot point on every time. If you’re shooting at 37 yards, for example, you set the sight once, and you only hold dead on the target. Also, there’s no chance of using the wrong pin when you’re aiming, as there is only one option. Many of today’s mid to high-grade sights now features an integrated bubble level. This feature helps you keep your bow perfectly upright when shooting.
Table of Contents
Best Shotgun Scope: Shooting for Accuracy
Even though we didn’t expect it, given the price, you still get a toolless micro adjustment system for windage. To make the adjustments even smoother, the glide bushings are filled with Teflon. It’s made of an all-aluminum construction which makes it more durable than any polymer sight on the market.
This allows you to look through it and set the sight’s pins at the correct distance. This is an important piece of your shooting experience because it will establish an anchor point. You’ll find peeps in various sizes, and they’re often aligned with a rubber cord that you attach to the frame of the bow. Tritium is a radioactive element that’s added to paint, and it gathers light just like the luminous dials on a watch do. It will give you more or less the same effect – an illuminated pin for easier sighting.
MULTI-PIN VS SINGLE PIN
Remain on the ten-yard checkpoint and make a shot utilizing the top pin. There are several different types of bow sights, but finding one that works for you will depend on your preference and wallet. Here is a brief explanation of the sights most commonly used. Adjusting a bow sight is essential for consistent, and accurate shooting, but it takes concentration and preparation. Modern bow sight systems are sturdy and seemingly simple, yet very high-tech and indeed made lives less demanding and precise. A few manufacturers take a more unique approach, infusing their sight pins with small amounts of radioactive tritium or phosphorescent powder.
Archery is a very popular sport that challenges both hunters and target shooters alike. It gives them a chance to practice and improve their skills. An archer cannot simply point a bow in the general direction of their target and expect to hit it with consistent accuracy. This is where sighting in a bow with bow sights can improve your accuracy.
How to Adjust Bow Sight For 100% Accuracy [3 Techniques]
The 3rd axis of the sight is the rotational axis that the sight level moves on as the sight body angles either toward you or away from you at full draw. Now draw your bow and line up your pins with this string at a 90-degree angle. Now, begin to bend at the waist and aim down about 45 degrees. Maintain your vertical level as you follow the string down and watch the bubble. If your bubble moves to one side of the level or the other, then your third axis is off.
If you have ever set the pins on a bow sight, it’s rather enjoyable, though it can be time-consuming. Getting your 3rd Axis right essentially means getting the plane of the sight to be perpendicular to the path of your arrow. But due to individual shooting form variations, 3rd Axis leveling cannot be done on a vice or jig. It’s also worth noting that some bow risers can flex considerably at full draw – also degrading 3rd Axis alignment. So again, a 3rd Axis adjustment is best made with the bow at full draw.
Set Your Second Pin at 30 Yards
However, it does come with micro adjust knobs, as well as locking knobs. The micro-adjust knobs will let you dial windage and elevation, to make sure that you’re aiming right where you should be. This is a toolless adjustment, and the knobs work smoothly and accurately, just as expected.
Make no less than four shots, keeping in mind the end goal to make exact conformities. This doesn’t seem to have made much of a difference with regards to the grouping of fletched and unfletched arrows. The position where you set your extension bar also has an effect on your bow shoulder, albeit minimal. Compare shooting from the same distance, one with the ext bar all the way out, the other with it in the middle. Setting the bar all the way out means you have to aim slightly higher (bow hand’s higher) than if you were to position it in the middle.
The 8 Best Long Range Scopes
This means that you have to place the sight pins farther apart on your sight. For some archers that shoot high powered bows at short distances it might be beneficial to place the sight far away from the riser. Therefore you can more easily distinguish between the different sight pins.
Some may argue that multi-pin bow sights are better, but we’ll discuss that later on. Here, you have the advantage of not needing to move all pins around. You can sight it in for ranges of 20, 30, 40, 50 yards, or more, provided your bow has enough power for that. You’ll get a tape kit included, which will allow you to sight the Pursuit at either yards or yards, depending on your needs. A sight with 3rd-Axis adjustments can be adjusted so that the entire sight housing can swivel inward or outward .
RELATED ARTICLES
The “Dial of Death” and the Photochromatic Technology are excellent additions, and ones you won’t find on archery sights made by other brands. If you like the feature set and appreciate the confidence they have in their products, you should get it – you won’t regret it anytime soon. Starting things off with the pin options, the IQ Micro comes with either three, five or seven pins. Note that you can remove pins with an Allen wrench and a bit of fiddling with the optic cables. Therefore, when you’re choosing, get the highest amount of pins you’ll actually use.
Ultra-bright pins can often create a halo or starburst effect that can be very distracting – akin to looking into a bright light. As such, we recommend you choose pins that have a reasonable amount of fiber optics. A 3D Competition Sight often called a Target Sight, is a specialty sight which is designed for use in competition. Due to the size, cost, and complexity of these sights, they are rarely used for hunting – but they are arguably the most accurate sights available.
Vertical Sight Adjustment
Some archers have such minimal clearance, that their arrow vanes actually hit their sight. You may have too high of an anchor point or your peep sight is installed too low. Either of these things can cause you to place your sight too low. If you’re shooting to the left on steep downhill shots, you need to turn the level away from you. If you’re shooting to the left on uphill shots, the opposite is true.
Common Sight Adjustment Issues
You may also consider a laser alignment tool to help precisely adjust it, although this tool isn’t necessary. Especially if you have a high quality sight, the entire assembly will weigh quite allot. I jokingly mentioned in another article, that you would probably be able to hammer a nail in a piece of wood with my current sight. Since sights tend to be quite heavy some archers even use a counterweight on their riser or side stabilizer to balance out the bow.
English 
Romanian