Bear Grylls Gear

Survive in the Wild With the Latest Gear

How To Restring A Compound Bow At Home

8 min read

Here’s everything you need to know about How To Restring A Compound Bow At Home. Find all the information it in this article.

Here are a number of indications you should keep in mind. With the tips in this article, you’ll be well on your way to replacing your bow’s string and enjoying a new one in no time. Make sure that the hand that’s on the bow’s upper limb will put the string in place. It is possible to restring a recurve bow without the use of a stringer.

Note, that some guys use rubbing alcohol to wet the tube so that it will go on easier. Then, I installed the peep working the two halves of string into the grooves on either side of the peep. Slip something between the center of the twisted string’s braids. I used a technical tool specially made for this process…a chopstick. There is also a cheap alternative to my Cheap Bow Press Methods that do not risk bodily harm or destruction of property, called a Bowmaster Portable Bow Press. They are about $40, and if I continue to do all of the work on my daughter’s (and hopefully other kids’) bows in the future, I’m going to have to break down and get one.

How To Replace The Compound Bow Cable Using The Bow Press

You might also need to use the bow press to help you compress the bow for this cable attaching process. Starting on the left-hand side of the bow on the bottom cam, take the bus cable off the top axle. Pull it gently towards you to remove it from the cable slide and then take it off the bottom cam on the right-hand side of the bow.

Serving areas are the areas reinforcing the bowstring with an additional thread tied over the bowstring for avoiding excessive wear in high friction areas. In a compound bow, these serving areas include the nocking area and places where the bowstring can rub on parts of the bow like the cams, roller guards, and string stops. Most doctors will be keen for you to regain your prowess as an indication of your progress through recovery. After using your compound bow for a while, you might be wondering about when you should replace the string. Well, for a compound bow string replacement, it is typically said that the best time to replace a bow is once a year. However, this depends on how often you use it, and how much you do to maintain it.

The Process For How To Restring A Compound Bow

Many of these can still be placed in a bow press for safer stringing. The reason for using a professional archery store is that they will have the correct tools for restringing compound bows safely and will often use a full bow press. Restringing your compound bow is easy if you plan ahead. Regardless if it’s with or without a bow press, proper inspection of your bowstring and your tools is crucial in saving you time. Read on as we show you how to restring your compound bow.

Even if it’s not showing any clear signs of wear, after a couple of years of semi-regular shooting – a bowstring simply needs to be changed. Wax will not sort out fraying or splitting – these two signs mean the bow needs restringing. You can never tell just when the tipping point is for a frayed string to snap. It will happen without warning, so always err on the side of caution and change your bowstring first if you’re in any doubt. In fact, it’s good practice to wax your bowstring a little after every time you shoot.

Can You Leave A Compound Bow Strung?

My local archery shop has had my bow for 3 weeks, and that seems like a Really Really long time. Lower your compound bow slowly until both limbs are in the original position. Additionally, there is a chance that the compound bow could be damaged. Regular inspections will help keep your shooting game at the highest level.

You can get both portable and fixed bow presses, depending on which one suits your needs. If you have several archery shops within your local area, it’s worth shopping around and comparing prices to see who can do it for the lowest price. If you want to buy a full bow press, these can set you back hundreds of dollars. Doing it wrong places a lot of stress on the components of the bow and can also be extremely dangerous if the bow or the string snaps while you’re trying to shoot. How much you spend will depend on several factors, such as how much you shoot and the draw weight that you want to shoot with. If you find any of these conditions on the string prior to installing it, we recommend that you replace it with a new string or bowstring.

Checking The New Bow String

This can be a major issue if you don’t continue with proper upkeep. Hold the bow in one hand and put one of your feet down onto the older string. Now pull the bow toward your body and up away from the string. You don’t want it to be pulled too much, but enough to feel some resistance and so you’re able to reach both ends of the bow. These bolts are tight and must be loosened in order to finish this process. So, loosen the bolts one at a time switching off between the sides.

Either way, don’t assume that the fault automatically lies with you. If you regularly use your bow, consider the possibility of wear. When you pick up your bow, before use, you need a visual checklist. Check for signs of damage and wear on the bowstring to make sure your bow is safe to use. If the bowstring is showing signs of wear or damage, it may be time for a restring. All bows should be restrung about every two to three years, depending on how often you shoot.

Step 4

It’s definitely good practice to spend a bit extra to get a high-quality and durable bowstring from a recognized brand if you’re going to be doing a lot of shooting. Even with DIY restringing, you’ll still need a new bowstring for your compound bow. Once you’ve inspected your string and cables, the next step of the process is to remove the nocks from both ends of your bowstring. Some bows allow only one side to be removed, while others allow both sides to come off.

Join The Online Archery Academy

Aside from checking your current bow string, a thorough inspection on the string you plan to have installed is a sound decision to make too. To replace the string you can step on the riser and raise the string, or vice versa. A bowstring should feel slightly waxy if it is in good condition.

Stringing A Compound Bow: Step By Step

To do this, simply knock an arrow, and position the bow where you are looking down the bow from above. Unless the bow shop is setting your bow up for free because you just spent a Gagillion Dollars on a new bow, then they will charge you for their time to set your bow up. With that final check over complete, your bow now has its new cables and string. You can remove it from the bow press, or have your partner release it from its compressed state. Ok, I have tried to break it down in some easy steps that you can follow to restring your bow.

How To Restring A Compound Bow Diy: No Bow Press Required!

Finally, use the Allen wrench to tighten the limb bolts. Also, it is always recommended to replace the string if you’ve purchased a used bow since you won’t know if the string is original or has already been previously replaced. Long, thin plates added to either side of the rail meant to discourage users from placing their fingers above the arrow/flight track. This helps avoid possible injury from the string striking the user’s fingers when a crossbow is shot. If you could sell the pile to someone with the skill set to fix them up and sell them, you could put the money towards some Glasser fiberglass bows with real horsehair. When they wear out Glasser will take them back in trade.

When Do You Need To Restring A Bow?

Remove the arrows from the quiver and lay them on a flat surface. You can’t place the minor pieces on squares that are next to each other, and you can’t have the two pieces in the same color. To create this article, 10 people, some anonymous, worked to edit and improve it over time.

Why Is It Important To Restring Your Bow?

In the case of the pilot, it is a formal checklist of the pre-flight conditions. When you were learning, your instructor probably made you verbalize – seat position, rear view mirror, side view mirrors, and so on. There is nothing worse for your self confidence than being faced with a loss of performance. You can continue to enjoy archery and let your bow practice be a positive step towards recovery.

Check for fraying at the ends, wear spots, and any other damage. If you find significant damage to your string during this step in how to restring a compound bow, I recommend replacing it with a new one. Unless it’s just nock end serving material that has come loose, then you can simply reattach it by melting the ends where it’s missing. I live in Alberta, Canada where I enjoy 3D archery and indoor target shooting with traditional bows and compound bows. On this site, I share everything I’ve learned about archery along the way. Because we’re not using the teardrop attachments on these types of bows, we must use the cams and wheels to change the strings.

en_USEnglish