Bear Grylls Gear

Survive in the Wild With the Latest Gear

How To Tie A Loop Knot For Crappie Fishing

7 min read

Here’s everything you need to know about How To Tie A Loop Knot For Crappie Fishing. Find all the information it in this article.

Loop knots provide a more natural lure presentation, as the jig can hang properly and swing about freely. A jig tied with this type of knot will sit horizontally in the water as it was designed to do. On the other hand, a directly tied knot, such as the palomar, can slide up or down on the eye of the jig, and cause the bait to sit diagonally in the water. To begin, drop everything except for the leader line. I start with a simple overhand knot with about 4 inches on the tag end.

Otherwise I’m constantly picking scum and debris off of the knot. Loops are also more visible than smaller knots, but if you’re using small diameter line for crappie, this shouldn’t matter at all. This certainly doesn’t matter if you’re fishing in stained water. There are of course a few disadvantages to using loop knots. In spite of the 3 negatives discussed below, I still think the benefits outweigh the negatives, except perhaps in the last scenario. Strong and effective, the Perfection Loop knot is a favorite for tying a loop at the end of the fishing line.

Advantages Of The Loop Knot

It’s called Danville’s 210 Denier Waxed Flymaster Plus. While holding the overhand knot between thumb and forefinger, pass end of loop over the hook. The initial triple wrap of the line provides the extra breaking strength. However, apart from that small change, the rest of the knot is tied just like the Improved Clinch Knot. The Surgeon’s Loop Knot is perhaps the best of the 3.

Color – Most color choice is a personal preference. Since the thread usually only shows up on the head of a finished fly, all you need to do is determine the color you would like the head to be. On thinly dressed flies, the thread color influences the color of the fly when wet.

Loop Knots Allow Lures To Work More Naturally, Which Is A Big Factor When Slabs Arent In A Real Feeding Mood

So you can stock up on more colors for the same amount of money . Three basic thread types dominate the fly tying market. Nylon, Polyester and Kevlar are the most used threads by today’s tiers. Silk or newer gel spun polyethylene is also available if one looks hard enough. Nylon and polyester are cheap, thin and strong, making them ideal for tiers. Tie a loose overhand knot with the hook hanging from the bottom of the loop formed.

It proved successful in the highly pressured lakes of the West and is considered a “finesse” technique. The idea is to suspend a bait off the bottom at a level that will put the bait in front of the fish and/or get the bait up and out of the gunk at the bottom. The weight is dropped vertically to the bottom and the bait is lightly shaken to attract attention.

Saves Time Throughout The Day

Want to see everything you need to get your kayak ready for a saltwater fishing trip? Check out this video to learn what you need, and what you don’t need. Got better results when I hand tighten pulling the tag end and the main. I was inadvertently pulling on the lure which was causing my loop to close.

I use a drop shot weight and don’t even need the bottom loop. They usually feed actively a couple of times a day, and that’s when they’ll hit just about anything. But other times, you have to convince them to bite. There are lots of tricks and lure modifications to do that. If you know how to tie a Snell knot, the egg loop might be easy for you because the egg loop is a modified version of a Snell knot. Want to see what an ideal speckled trout feeding zone looks like?

Advantages Of Loop Knots For Crappie Jigs

The second one is theNo Knot Fas-Snapwhich is a very popular choice. The Loop Knot is a really good fishing knot, a favorite in fact, and you’ll see why towards the end. Makers of waterproof knot guides for outdoor sports, Pro-Knot cards are carried by Bass Pro Shops online and in stores. Let go of the tag end and pull the main line tight to cinch the knot. Make an overhand loop about three to four inches up from the tag end of your line.

These manufactured loops used to be awkward and large years ago. Strong –The Loop to Loop Knot’s strength is the same as the individual knots that made it. The Perfection Loop Knot is approximately 95% of the line’s strength. You don’t want to be the one to tie a leader when the trout rise to take mayflies off the surface.

Method 2method 2 Of 3:making A Perfection Loop Knot

The knot begins with three consecutive wraps around the eye of the hook , which immediately gives it an efficiency edge with triple line backing. Make an overhand knot in the line about 10 inches from the end. Pass the tag end through the hook eye and back through the loop of the overhand knot. Sign-up to receive our monthly newsletter with interesting blogs about fishing and boating.

What Is 200 Denier Thread?

I haven’t found a better, stronger, or easier way than to add in the Surgeon’s knot to make a Dropper Loop knot (but I’m always looking). Pass the tag end through the hook eye and run the line from the top of the hook down along the shank. Hold the line in place with your thumb and forefinger.

How To Tie The Improved Clinch Knot

As we have discussed, this knot holds in the fly line, monofilament, and fluorocarbon like it has been dipped into Superglue. If you use long leaders, the second situation will happen. It is slow to pull the leader’s foot through a loop, which defeats much of the purpose. The combination of two Perfection Loops with a connection between them could cause problems. A good Nail Knot, a Clinch Knot, or a two-turn Uni Knot to a welding loop connection is slimmer and less likely for snags.

About Express Fishings

Britt Edelen was an active member of his local Boy Scouts troop near Athens, Georgia from ages 8 to 16. As a Scout, he went on dozens of camping trips, learned and practiced many wilderness survival skills, and spent countless hours appreciating the great outdoors. Wrap the “end” back through the overhand knot again. Take the loop end and wrap it around the back of the overhand knot. Pull it back through the overhand knot a second time. Here are the knot strength efficiency numbers for the Triple Loop Knot as tested on monofilament, fluorocarbon, and braidedfishing lines.

Fishing Knot Library: How To Tie A Non Slip Loop Knot

Strong and effective the Perfection Loop is a favorite for tying a loop at the end of the line. Besides being strong and reliable, it can be crafted to make a very small loop if desired. The Perfection Loop Knot is one of 12 great fishing knots included on the Pro-Knot Fishing Knot Cards . Hi Luke thanks for great job on best knots with actual tests!

Fishing Knots: How To Tie

Use the Perfection Loop to tie a nice compact and reliable loop at the end of a fishing line. The Surgeons End Loop is easier to tie and is considered totally reliable but makes a knot that is just a little bulkier and the loop lays a little off center. The Dropper Loop makes a loop anywhere in the middle of the line which is useful for attaching hooks or other tackle. The 3 best loop knots I’m aware of are the Rapala, surgeon’s and the non-slip loop knot. Each one is discussed below with a link to my Youtube video on how to tie them.

What Thread Do You Use To Tie Crappie Jigs?

Actually bigger loops, up to a point, are sometimes better. I’m fine with anywhere between 1/4″ and 3/4″ long loops, but you can even go a little bigger than that. If my loop comes out longer than 3/4″, that’s fine.

Fishing Knot Library: How To Tie A Surgeon’s End Loop Knot

Sometimes this knot is also referred to as a bumper knot or roe fishing knot. Follow the steps to learn how to tie an egg loop knot in this section. The easiest way to learn is have someone show you in person, watch a video such as the one below or search for “crappie loop knots” on the internet.

en_USEnglish