Camper van seating designed to work with l-track systems. Compatible with all vans as long as there a properly installed l-track system. Captain’s seats, bench seats and seat lockers. Titan DIY Kits empowers camper van owners and builders to build the van of their dreams.
With a steady hand, Josh grabbed a cutoff wheel and followed the upper seam of the cab panel from the passenger to the driver’s side. To start the actual process of removing the rear window, Josh sliced into the outer rubber and began to slowly pull it out. To start, Josh removed the bench seat from the cab. The upholstery work is too nice to subject it to the inevitable sparks that are soon to fly, but every inch of interior space will be necessary to get the job done.
Table of Contents
Titan rear sliding window
Anyone out there with experience with these or this vendor. Bought my Sierra used and the only thing it did not have was the sliding rear window. I actually prefer manual to auto for use with fly rods out the back window. The difference the big window makes is enormous. It opens the cab up to better lighting on a sunny day and makes it easier to keep tabs on your surroundings.
I would really like to see someone come out with something to make ext cab rear door windows roll down… Make those things roll down that would be fukin sweet as hell… So I just bought a 2015 Nissan Titan sv extended cab. This exact model has the manual sliding small glass window on the back window. My question is this, can the back glass be converted to the power roll down large window as pictured below?
Street Rod and Universal Kits
Then you know these things are getting much more difficult to find, and if you do locate one, the price tag is substantially higher than its smaller counterparts. If you happen to track one down that’s a reasonable price, jump on it. For those of us who haven’t been so lucky, there is hope. Be advised that a big-window conversion requires the attention of a seasoned fabricator, though. For vehicles traveling at high speeds for extended periods of time we do suggest installing bracing to prevent deflection. I do trim work on houses and sometimes need to carry 16 to 20 ft trim.
I’d open the rear window, put a towel on the dash and slide them through; great for last minute jobsite deliveries. That’s about the only thing I miss on the Sierra. Have you been scouring the market for a first-gen C-10 with a big factory panoramic-style rear cab window?
DIY 1947-53 Chevrolet Truck 3 to 5 Window Conversion
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. This is an older thread, you may not receive a response, and could be reviving an old thread.
Two wires run to the motor mounted underneath the rear exhaust vents . Power has an inline fuse, and with ground they go from the switch to +12v and the frame, respecitvely. The blacked out edges of the new window are different from the old window in that from the outside you can see the back side of the upper rear trim pieces . I may get some black cloth to cover it…
2017 Ford F-150 Back Glass Power Sliding Rear Slider Window OEM Motor
When you pull the rear interior panel off , you’ll see a vent with flaps on it . The motor assembly thing looks like a fishing pole. One end is the motor, about the size of a fist, then there’s a long rigid portion, maybe 2 feet long and 1″ x 1″ cross section. This is connected by a cable to the window slider at the bottom passenger side of the window.
I knew WTF I was buying and I love my truck. I was simply asking for some information from the board not “ acting” like I’m rocking this or that. Take your yankee ass to another thread and STFU. Well I was keeping track of all my mods but it’s beyond FUBAR now so… If anyone else wants to swap windows im down too.
Most Recent News
This is not an expensive mod at all… Actually it comes in less that what you pay for the small window in the LTZ or High Country…
The sound insulation kinda shows (this being issue #2). If I can’t swap then I’ll just have to buy a rear window. The slider in my truck would be hard to get into .
Titan Window Glass Kit
Hear are some pics of one I’ve seen on IG… Single Universal Power Window unit with wiring and single switch. Although the information on this website is deemed accurate and reliable, we will not be held liable for any errors or omissions.
A1 Electric carries a complete line of Electric Life power window kits for Chevrolet & GMC pickup trucks. Whether you have a 2017 Chevy truck or a 1949 Chevy truck we have a power window kit for you. These kits are easy to install and work just like factory. We have these kits in stock and ready to ship. Switch kits are sold separately to give the installer total control over the appearance. Our kits meet ISO9002 standards and come with a limited lifetime warranty.
FITS: 2007-2013 GMC Sierra & Chevrolet Silverado Rear Window Back Glass
Remove your inner small window panel and replace it with our panel and you will have converted your truck to a big back window. Check out the videos below for installation instructions. Specialty Power Windows supply you with one of our universal kits. That looks clean, very good installation. At first I thought it would be the whole rear window sliding down, wish that could be done, but these pics have changed my mind a bit.
For 2007-2013 Chevy Silverado 1500 Power Window Motor and Regulator Rr Left
We’ll notify you via e-mail of your refund once we’ve received and processed the returned item. You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. Recessed and surface L-tracks for Sprinter, Transit and ProMaster vans. These L-tracks are specifically designed to fit in camper vans.
English 
Romanian