Note that you will need to enter in your radio code and any preset radio stations and settings will be reset to default. Remove the battery by lifting up and pulling it towards you. Be sure to wear gloves as the white corrosion is acidic and will damage your skin. Remove the positive terminal (Red / POS / -) with the 10mm socket. Remove the negative terminal (Black / NEG / -) with the 10mm socket. Locate the retaining bracket on the side nearest to you.
You get 100% starting power and 100% reserve power, and X2Power batteries are 3x longer-lasting than traditional flooded batteries. 28x more vibration resistant, too. Use a 10mm wrench to loosen the ground line bolt and remove it from the battery. Remove the positive ground line from the battery. Loosen the battery’s hold down bracket nut and fold the hold-down bracket back. Install the new auxiliary battery, completing all of the above steps in reverse order.
Table of Contents
Clogged fuel filter
Connect the other end of the red cable to the positive terminal of donor battery. I have ordered a trickle charger to keep it topped up. As a meter of interest, where is the second battery? I looked in the boot and there isn’t one in there, the car does have stop/start. A customer dropped off a Mercedes Benz GLE 350 that had the auxiliary battery light on. Upon inspection we discovered that the auxiliary battery had failed.
It will be in the colors red and black to help You identify it. You will need to pay between $98 and $350 for a new battery, if needed. Rodent damage can be another reason why your Mercedes-Benz GLE350 won’t start.
Select a Replacement Battery for Your Mercedes-Benz
The box is under power and repairs or tests should always be done in a workshop. The fuel filter of your GLE350 does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure.
The 12 volt battery is a vital component of the starting system in Mercedes-Benz GLE. It powers the starter motor that turns over the engine. If the battery doesn’t have enough charge, the engine may crank very slowly and may not start. Slow crank is usually the first symptom of a dying battery. More precisely, it is located under the passenger seat.
Parked for a long time
The battery should also have the same cranking amp and reserve capacity as the old battery. Unplug the positive battery terminal. You will need to insulate this part with electrical tape, as it is crucial not to let the positive terminal make contact with any metal part of the Mercedes, including the car frame.
AutoPadre knows times are getting tough for all of us, so we partnered with Upstart to save you some money on financing. Check the battery size for other makes and models here. To choose the correct battery for Mercedes GL Class models click the link.
Safety Precautions When Changing a Mercedes Car Battery
Thankfully, the Mercedes battery is very easy to find. The first thing You will need to do is go to the front of Your vehicle, and open the hood. Use to prop arm to keep it up securely. Next, look into the engine bay, toward the driver’s side, near the engine block. You will see a large-ish black box with a connector on top.
Currently the app is showing the starter battery as partially charged. If you do have a second battery it will recharge as you charge the main battery in the engine compartment. Excludes Sprinter Cab Chassis models, Metris models, National and Medium fleet customers. Must take delivery of vehicle by January 4, 2022.
Install a New Battery.
Put your key horizontally into the open slot. Replace the existing CR 2025 batteries with two new ones. Pull on the tab at the bottom of the fob. Push the key into the narrow end of the slot to remove the cover..
Take out the bracket that keeps the battery in place. The bracket is fastened with a 13mm bolt and typically requires the use of an extension to remove. With the bracket out of the way, remove the dead battery from the car. Beware of the weight factor, as car batteries are usually heavy.
Engine failure
Is there a second starter battery in addition to a main battery? Just that MercedesMe sent me a text saying it was charge status was critical. Take the new battery and place it in the battery tray. Next, put the battery bracket back into place. Reconnect both the positive and negative battery terminals, respectively.
Then disconnect the positive terminal of the battery. Finally connect the other end of the black cable to any bare unpainted metal part of the body or engine of your GLE. This video shows the location of the second battery of a Mercedes E-Class.
Clean battery corrosion
They should be able to access the radio code when you tell them the VIN. Resort to the owner’s manual of your Mercedes-Benz to reset the clock after installing your new battery. Instructions for the time-setter vary between different models.
Replace the dead battery
Touch one probe to the negative terminal of the battery, and the other probe to any exposed metal part of the engine. The reading should be at or very close to zero ohms. Do the same between the negative terminal of the battery and any exposed metal part of the chassis/body. To know if your GLE starting problems are from dirty battery terminals, you need to investigate them. Lift the plastic covers over the terminals and check for any signs of corrosion.
English 
Romanian