Star Drag Vs Lever Drag pentru pescuitul de fund

Iată tot ce trebuie să știți despre Star Drag Vs Lever Drag pentru pescuitul pe fund. Găsiți toate informațiile în acest articol.

This is because to run a high drag pressure means there is still pre-load on the bearings and drag washer when the lever is backed off to the “free” position. When a manufacturer quotes a maximum drag pressure for a lever drag reel, this generally means the maximum attainable whilst maintaining a true free spool setting. Conventional reels traditionally use what is called a star drag system but many conventional reels are now made with a lever drag system.

Even with that discount the Torsa is out of my price range. So my choices are now the Trinidad (either the gold or the new “A” series) or the Talica. TLDs are great trolling reels but there are much better options for bottom fishing, I too am partial to the Penn Baja Special, built like a tank and won’t break the bank. For many a decade, if a guy could only have one reel for offshore Florida work, from trolling to bottom fishing, you weren’t going wrong with a Penn Senator 4/0. All of the fathom reels worked good out of the box and were excellent after bearing clean up and some grease on the drags….

Star Drag Vs Lever Drag pentru pescuitul de fund

When using mono-filament and ceramic guides, the drag reading will be very close to your reference number. Leaving the reel on the rod, unstring it from the guides, and reattach the scale. This number is what your reel should be set to each time you use the same combination of rod, line and reel. And in many cases the fibre washers will get a hard “glazed” surface , eliminating the texture needed to provide the “happy medium” of friction to slip . This condition requires more pressure on the washers to achieve the proper drag at the spool , causing more heat buildup, and an inconsistant , jerky drag.

I also am a fan of the Ultimate Tournament Drag with its oil impregnated washers. With proper care and maintenance the Seagate will provide great action against fish within model weight range. The centrifugal spool brake helps keep the spool from spinning faster than the release of line, a great aid to anglers learning how to cast. Every offshore fisherman knows the frustration of bird nested line in a frozen spool.

More Gear

This provides good hook sets and prevent fish from breaking the lures off the line. As far as ld reels go as far as i know their are verry few that cave cast breaks that sd reels have so casting them is tricker. Daiwa moves a step up from their Sealine line of conventional reels by offering anglers the Seagate series. Built tougher and with a stronger gear train, the Daiwa Seagate steps up with added features as well. The Seagate uses Helical cut gears which increase strength and smoothness in the drive. Other examples of additional features include Daiwa’s Ultimate Tournament Carbon Drag system and Centrifugal Spool Brake.

Revolutionary design and shape provides the comfort of low profile with the capacity of a conventional reel. X-SHIP and HEG technologies combine to provide massive cranking power with a smooth effortless retrieve. Add extra drag to a spinning reel when the fish is close and the fight is nearing its end by cupping the spool with your fingers.

Star

Therefore, drag-setting standards were developed around the use of monofilament, which stretches as much as 25 percent. Use a scale to set the exact drag pressure, measured in pounds, of your fishing reel. Learn how to set and manage the drag settings on your fishing reel. Cod taken using a Penn 975 lever drag with 20lb braid.

In the case of reels, the radius is actually the distance from the center of the spool to where the line exits. This product is a reasonably priced alternative for individuals looking for the best value for the cost. Penn has been building reels for a decent amount of time now, during which the company’s engineers have learned a lot about the needs of the modern fisherman. Well designed for the purpose, the Shimano Tekota has an oversized cast control knob, Septon handle grip and a manual clutch lever.

What Is Drag On A Fishing Reel?

Handle the pressure, and you and your reel can turn even the biggest tuna. If you’re willing to invest a pretty penny in the perfect fishing reel, you’re more than free to give a chance to the Penn Gold Label Series. As is the case with the Penn item we’ve described above, this one features the unique quick-shift patented 2-speed system that makes it possible for the reel to be used either in low or high gear.

His conclusion was, if anyone wants level wind with low maintenance, go for Shimano. He rekons all other level winds fail without lubrication whereas Shimano just keep going without needing love. The single speed TAC8 has exactly the same retrieve that the Shimano Ocea Jigger 2000P.

Lever Drag Vs Star Drag

Most average size fish arent pulling much if any drag. Of course, you will also want to consider your line size. Of course, the larger your line size, the more money you will have to spend on a reel. After that, consider your backing and whether or not you’ll need a separate aluminum spool for this type of backing. Finally, if you are fishing for bass in saltwater, choose a corrosion-resistant reel built with saltwater grade materials.

Best 3 Tuna Fishing Reels Compared In 2022

Have used mine to reel up from 600’-900’ no probs, even an 80 LB aj from 600’. Or for bottom fishing I use my alutecnos gorilla 12C. 40 lbs of drag and the thing is a winch when getting those fish up off the bottom. Ok now as for backing off the drags – EXACTLY – BUT PLEASE REMEMBER – if you are using a reel with wet drag washers you DO NOT want to fully back off the drag till it is completely disengaged.

Strike Zone

I have/had some upgrades on the my 4000P and the trini 40 that i sold and they were tanks. Continue in this manner until your scale reads your reference number and your rod is at 90 degrees. What you have done is take into account the friction of the guides, the friction of the level wind and the friction of the line it self. Now fill your reel with the proper weight line for your rod, attach the reel to your rod and string the line through the guides.

Urmăriți Boats Com

Was having a discussion with the owner of my local tackle shop last week over numerous things; one of which was level wind V no level wind. This will give you a comfortable cushion for the rare demon fish. Bret is right on with the Ocea Jigger 4000P, i just assumed that you were constrained by having to buy a reel available in the US and not ebay/overseas. I probably would never jig with a torsa , but then I’d also never jig with the jm reels either, they’re just too slow. You have to be a little more diligent about putting the lever all the way into strike, but its easy to get used to. The drag is already engaged with a star, all you have to do is bump it into gear.

Other Things To Consider When Choosing Your Bass Fishing Reel

The lever drag can be set up like a “bait runner” by using the drags tension to just stem the pull of the tide and then moving the drag pressure up to a known setting when a bite comes along. This is much easier than slackening off a star drag to achieve the same thing. As I said earlier, over the last few years I have tried lever drag more for things like drift fishing for pollack & bass; I was pleasantly surprised. I set the strike position to a known value which would be the most pressure I would probably want.

Star Drag Vs Lever Drag Reel : Which One Is Better

The reel is armed with an anodized and machined aluminum spool with what is called a Free Floating or Live Spindle design. The live spindle enables you to cast greater distances as the spool spins independently of the pinion gear and spindle that reduces the friction. The freespool is “freeer” if u get what i mean and its a switch not a lever to get into freespool.

My workhorse reels for bottom fishing are a newell 235 and a penn 320gti. When wreck fishing i like to leave the reel in freespool. When i get a bite, i then put the reel in gear which is a flick of a small switch vs moving the lever. Leaving in freespool allowed the sinker to stay in the bottom as the boat moved up and down and i could pick up the belly in the line by spinning the spool.

Star Drag Systems

The star drag is less expensive due to the low cost of production. This angler stopped a giant trevally from reaching structure after locking down his drag. The Penn Gold PGLSIV provides you with Quick Shift, a simple way to engage high speed or low speed with the help of a shift button, without letting go of the handle. Nothing beats the sturdiness of the Penn Gold PGLSIV as we’ve seen that it does its job wonderfully with under the heaviest loads. The reel has about 500 yards less braid line capacity than the producer specifies. This gear is ideal for saltwater because of the corrosion resistant materials.